TOP CATEGORIES
SALE PRODUCTS
HAMMERHEAD CINCH BACK PLIER
The Hammerhead Cinch Back Plier is specially design for Niti wires to make a bend on distal end. The serrated tip make a firm grip and make the wire study while forming the distal en of Niti archwires .The ergonomic design is for providing precise control and smooth working.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .016” (.41mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
JARABAK PLIER
The Jarabak Plier is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensures uniformity in wire bending and closing loops.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
JARABAK PLIER WITH CUTTER
The Jarabak Plier with cutter is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensure uniformity in wire bending and closing loops. The feature added cutter at the end of the beaks with tungsten carbide sharp cutting blades can easily cuts stainless steel wires.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
KIM PLIER
Kim Plier With Cutter is designed for making multiple edgewise loops on archwires. The three steps loop forming tip have diameter 1.8mm, 2.8mm and 3.8mm. The tungsten carbide wire cutter at the end of the tip can easy cuts rectangular wires.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .014” (.36mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
HAMMERHEAD CINCH BACK PLIER
The Hammerhead Cinch Back Plier is specially design for Niti wires to make a bend on distal end. The serrated tip make a firm grip and make the wire study while forming the distal en of Niti archwires .The ergonomic design is for providing precise control and smooth working.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .016” (.41mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
JARABAK PLIER
The Jarabak Plier is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensures uniformity in wire bending and closing loops.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
JARABAK PLIER WITH CUTTER
The Jarabak Plier with cutter is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensure uniformity in wire bending and closing loops. The feature added cutter at the end of the beaks with tungsten carbide sharp cutting blades can easily cuts stainless steel wires.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
KIM PLIER
Kim Plier With Cutter is designed for making multiple edgewise loops on archwires. The three steps loop forming tip have diameter 1.8mm, 2.8mm and 3.8mm. The tungsten carbide wire cutter at the end of the tip can easy cuts rectangular wires.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .014” (.36mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
Classic wooden chair
Eames plastic side chair
MOST POPULAR
quis himenaeos velit.
SALE PRODUCTS
SELF-LOCKING BUCCAL TUBE TWEEZERS
Buccal Tube Tweezers are specially designed for placement easier and accurate position of buccal tube during the procedure. The slim and precise designed to contribute for proper appliance function and efficient treatment progress. Self-locking reverse-action mechanism and precise tips for firm grip and prevent any slippage.
BOOTSTRAP HOOK PLIER
The bootstrap punch hole plier is specialized designed for create along the gum line. It can create the perfect window for placement of bondable buttons and the orthodontic elastics are stretched from a bonded buttons to the notch on the aligner tray. It is also used to nip away plastic to provide relief from impingement to tissue.
DISTAL END FLUSH CUTTER SAFTY HOLD
A distal end flush cutter is specially design for precision cutting closed
the buccal and leaving a smooth flat without sharp or raised edges. The
tungsten carbide insert for long lasting durability and the sharp tips cut
and safely hold wire with no slippage. The compact and slim head
precisely design provides stability giving an
effortless cutting. T.C. tips insert make it strong and durable.
Cuts wires flush to end of the buccal tube and hold wire safely
| WIRE CUTS & HOLD CAPACITY | ||
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012" (.030mm) | .025" (.64mm) |
| RECTANGULAR | .016" X .016" (.41mm X .41mm) |
.021" X .025" (.55mm X .64mm) |
BIRD BEAK PLIER
The Bird Beak Plier Is design for adjusting retainers, bending and forming loops on arch wires also helpful for forming springs in ligature and light orthodontic wires. The tips designed a cone and a pyramid shaped beaks ensure smooth and wider grip and helpful to prevent wire slippage during the orthodontic procedure.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .025” (.64mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.022” × .025” (.56mm × .64mm) |
BAND PUSHER/ SCALER
Band Pusher with scaler is specially designed for double ended instrument. The one side band pusher is use for seating pre-molar and molar band. The groove and textured rectangular tip provides firm grip and avoid slippage. The other end of scaler is used to remove excess bonding and other material around the brackets.
FAVORITE GARDEN
web page editors now.
Ornare auctor
Wooden single drawer
Wine bottle lantern
HAMMERHEAD CINCH BACK PLIER
The Hammerhead Cinch Back Plier is specially design for Niti wires to make a bend on distal end. The serrated tip make a firm grip and make the wire study while forming the distal en of Niti archwires .The ergonomic design is for providing precise control and smooth working.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .016” (.41mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
JARABAK PLIER
The Jarabak Plier is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensures uniformity in wire bending and closing loops.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
JARABAK PLIER WITH CUTTER
The Jarabak Plier with cutter is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensure uniformity in wire bending and closing loops. The feature added cutter at the end of the beaks with tungsten carbide sharp cutting blades can easily cuts stainless steel wires.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
KIM PLIER
Kim Plier With Cutter is designed for making multiple edgewise loops on archwires. The three steps loop forming tip have diameter 1.8mm, 2.8mm and 3.8mm. The tungsten carbide wire cutter at the end of the tip can easy cuts rectangular wires.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .014” (.36mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
LIGHT PLIER WITH 2-GROOVE
The light wire with groove is designed with long cone and pyramid flat beaks used for give very fine and precise loops on light wires up to 0.20” (0.51 mm). The two parallel groove at the tips allowing to make duplicate and triplicate loop and the groove also ensure the firm grip on wires to helping out banding, holding and placing.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .020” (.51mm) |
LINGUAL ARCH FORMING PLIER
Lingual arch forming plier is used to create double back and triple back bends in lingual arch wires. It is also used to adjusting lingual braces that are placed on the interior surface of teeth. The precise 4 grooves are for making double and triple bend on the archwires. 0.030-0.036”
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .030” (.76mm) | .036” (.91mm) |
Frequently Asked Questions (FAQ)
1. General Company Information
How long has Signo-Med Instruments been in business? We were established in 2014. Since then, we have grown into a specialized manufacturer and exporter with over a decade of experience in the medical instrument industry.
Where are your major export markets located? We currently serve a global clientele, with our primary export regions being the United States, Europe, the Far East, and Central Asia.
2. Quality & Certifications
Are your instruments certified for international use? Yes. We are fully ISO 13485:2016 certified for Quality Management Systems. Our products also carry the CE Mark, ensuring they meet the stringent medical device regulations required in Europe and other international markets.
What materials do you use for your instruments? We use high-quality, medical-grade stainless steel (typically AISI 410, 420, and 304) to ensure our instruments are corrosion-resistant, durable, and capable of withstanding repeated sterilization/autoclaving.
3. Ordering & Manufacturing
Do you offer OEM or Private Label services? Yes. We work closely with partners who wish to market instruments under their own brand name. Our experienced engineers can help customize designs to meet your specific branding requirements.
What is the minimum order quantity (MOQ)? Our MOQs vary depending on the type of instrument. Please contact our sales team at [Insert Email] with your specific requirements for a customized quote.
Can I request samples before placing a bulk order? Absolutely. We encourage potential partners to evaluate our craftsmanship firsthand. Contact us to arrange for sample delivery to your location.
4. Shipping & Logistics
How long does shipping usually take? Lead times depend on the order size and destination. Generally, production takes 3–4 weeks, followed by shipping. We provide tracking information and estimated delivery dates for all international shipments to the USA, Europe, and Asia.
How are the instruments packaged? Each instrument is individually packed in moisture-proof packaging and then placed in secure, shock-resistant outer boxes to ensure they arrive in perfect clinical condition.
5. Support & Warranty
Do your instruments come with a warranty? Yes, we stand behind our quality. We offer a warranty against manufacturing defects and material flaws. If an instrument fails under normal recommended use, we will provide a replacement.
