TOP CATEGORIES
SALE PRODUCTS
HAMMERHEAD CINCH BACK PLIER
The Hammerhead Cinch Back Plier is specially design for Niti wires to make a bend on distal end. The serrated tip make a firm grip and make the wire study while forming the distal en of Niti archwires .The ergonomic design is for providing precise control and smooth working.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .016” (.41mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
JARABAK PLIER
The Jarabak Plier is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensures uniformity in wire bending and closing loops.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
JARABAK PLIER WITH CUTTER
The Jarabak Plier with cutter is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensure uniformity in wire bending and closing loops. The feature added cutter at the end of the beaks with tungsten carbide sharp cutting blades can easily cuts stainless steel wires.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
KIM PLIER
Kim Plier With Cutter is designed for making multiple edgewise loops on archwires. The three steps loop forming tip have diameter 1.8mm, 2.8mm and 3.8mm. The tungsten carbide wire cutter at the end of the tip can easy cuts rectangular wires.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .014” (.36mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
HAMMERHEAD CINCH BACK PLIER
The Hammerhead Cinch Back Plier is specially design for Niti wires to make a bend on distal end. The serrated tip make a firm grip and make the wire study while forming the distal en of Niti archwires .The ergonomic design is for providing precise control and smooth working.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .016” (.41mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
JARABAK PLIER
The Jarabak Plier is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensures uniformity in wire bending and closing loops.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
JARABAK PLIER WITH CUTTER
The Jarabak Plier with cutter is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensure uniformity in wire bending and closing loops. The feature added cutter at the end of the beaks with tungsten carbide sharp cutting blades can easily cuts stainless steel wires.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
KIM PLIER
Kim Plier With Cutter is designed for making multiple edgewise loops on archwires. The three steps loop forming tip have diameter 1.8mm, 2.8mm and 3.8mm. The tungsten carbide wire cutter at the end of the tip can easy cuts rectangular wires.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .014” (.36mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
Classic wooden chair
Eames plastic side chair
MOST POPULAR
quis himenaeos velit.
SALE PRODUCTS
YOUNG LOOP FORMING PLIER
The young Loop Forming Plier has three loop forming steps with diameters measures 1.3mm, 3mm and 4.2mm. it is used for making similar and identical loops in rectangular wires where the dental wire need loops. Up to 0.040” (1.0mm)
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .040” (1.0mm) |
STEP DETAILING PLIER 0.5mm
The Step Detailing Plier is design to create first and second order bands. The special double sided designed head make easy to create accurate 0.5mm step bend on arch wire. It is ideal for adjustment of archwire.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .014” (.36mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
STEP DETAILING PLIER 0.75mm
The Step Detailing Plier is design to create first and second order bands. The special double sided designed head make easy to create accurate 0.75mm step bend on arch wire. It is ideal for adjustment of archwire.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .014” (.36mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
ADAM UTILITY PLIER WITH GROOVE
The Adam plier with Groove is design for bending and adjusting orthodontic wire. The two side smooth flat pyramid style beaks that allow for making precise 90o right angled bend without damaging the wire. The groove on the tips is allowed for firm grip while working to the patient. This plier is widely used for clinics and laboratory for fabricating removable orthodontic appliances and auxiliaries
| WIRE BENDING CAPACITY | ||
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012" (.030mm) | .028" (.71mm) |
BOOTSTRAP HOOK PLIER
The bootstrap punch hole plier is specialized designed for create along the gum line. It can create the perfect window for placement of bondable buttons and the orthodontic elastics are stretched from a bonded buttons to the notch on the aligner tray. It is also used to nip away plastic to provide relief from impingement to tissue.
FAVORITE GARDEN
web page editors now.
Ornare auctor
Wooden single drawer
Wine bottle lantern
HAMMERHEAD CINCH BACK PLIER
The Hammerhead Cinch Back Plier is specially design for Niti wires to make a bend on distal end. The serrated tip make a firm grip and make the wire study while forming the distal en of Niti archwires .The ergonomic design is for providing precise control and smooth working.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .016” (.41mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
JARABAK PLIER
The Jarabak Plier is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensures uniformity in wire bending and closing loops.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
JARABAK PLIER WITH CUTTER
The Jarabak Plier with cutter is designed for bending light wires. The construction with small and very fine cone making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensure uniformity in wire bending and closing loops. The feature added cutter at the end of the beaks with tungsten carbide sharp cutting blades can easily cuts stainless steel wires.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
KIM PLIER
Kim Plier With Cutter is designed for making multiple edgewise loops on archwires. The three steps loop forming tip have diameter 1.8mm, 2.8mm and 3.8mm. The tungsten carbide wire cutter at the end of the tip can easy cuts rectangular wires.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .014” (.36mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.025” × .025” (.64mm × .64mm) |
LIGHT PLIER WITH 2-GROOVE
The light wire with groove is designed with long cone and pyramid flat beaks used for give very fine and precise loops on light wires up to 0.20” (0.51 mm). The two parallel groove at the tips allowing to make duplicate and triplicate loop and the groove also ensure the firm grip on wires to helping out banding, holding and placing.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .020” (.51mm) |
LINGUAL ARCH FORMING PLIER
Lingual arch forming plier is used to create double back and triple back bends in lingual arch wires. It is also used to adjusting lingual braces that are placed on the interior surface of teeth. The precise 4 grooves are for making double and triple bend on the archwires. 0.030-0.036”
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .030” (.76mm) | .036” (.91mm) |
Frequently Asked Questions (FAQ)
1. General Company Information
How long has Signo-Med Instruments been in business? We were established in 2014. Since then, we have grown into a specialized manufacturer and exporter with over a decade of experience in the medical instrument industry.
Where are your major export markets located? We currently serve a global clientele, with our primary export regions being the United States, Europe, the Far East, and Central Asia.
2. Quality & Certifications
Are your instruments certified for international use? Yes. We are fully ISO 13485:2016 certified for Quality Management Systems. Our products also carry the CE Mark, ensuring they meet the stringent medical device regulations required in Europe and other international markets.
What materials do you use for your instruments? We use high-quality, medical-grade stainless steel (typically AISI 410, 420, and 304) to ensure our instruments are corrosion-resistant, durable, and capable of withstanding repeated sterilization/autoclaving.
3. Ordering & Manufacturing
Do you offer OEM or Private Label services? Yes. We work closely with partners who wish to market instruments under their own brand name. Our experienced engineers can help customize designs to meet your specific branding requirements.
What is the minimum order quantity (MOQ)? Our MOQs vary depending on the type of instrument. Please contact our sales team at [Insert Email] with your specific requirements for a customized quote.
Can I request samples before placing a bulk order? Absolutely. We encourage potential partners to evaluate our craftsmanship firsthand. Contact us to arrange for sample delivery to your location.
4. Shipping & Logistics
How long does shipping usually take? Lead times depend on the order size and destination. Generally, production takes 3–4 weeks, followed by shipping. We provide tracking information and estimated delivery dates for all international shipments to the USA, Europe, and Asia.
How are the instruments packaged? Each instrument is individually packed in moisture-proof packaging and then placed in secure, shock-resistant outer boxes to ensure they arrive in perfect clinical condition.
5. Support & Warranty
Do your instruments come with a warranty? Yes, we stand behind our quality. We offer a warranty against manufacturing defects and material flaws. If an instrument fails under normal recommended use, we will provide a replacement.
