TORQUING PLIER MALE
The Torquing Plier male is specially designed to apply precise torque to archwires to rotate and align the teeth. This is frequently use to adjust archwires in braces, where precise torque application is essential for rotating teeth, adjusting their angles, and achieving proper occlusion. The main function of the Male Torquing Plier is to apply control torque to the archwire. This helps to rotate the teeth, adjust their angle, and correct their alignment.
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .016” (.41mm) | .020” (.51mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.022” × .028” (.55mm × .71mm) |
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
JARABAK PLIER
The Jarabak Plier is designed for bending light wires. The construction with small and very fine cone for making loops and springs. The micro serrated tip provides excellent control and grip. The grooves ensures uniformity in wire bending and closing loops.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
LIGHT PLIER WITH 2-GROOVE
The light wire with groove is designed with long cone and pyramid flat beaks used to give very fine and precise loops on light wires up to 0.20” (0.51 mm). The two parallel groove at the tips allowing to make duplicate and triplicate loops and the grooves also ensure the firm grip on wires for helping out banding, holding and placing.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .020” (.51mm) |
NANCE LOOP FORMING PLIER
The Nance Loop Forming plier is designed for making and forming loop in four lengths 3mm, 4mm, 5mm, and 6mm on stainless steel wires. The groove at the end of the beaks to aid in closing loops. The one side serrated tip ensures to prevent the wire slippage and helpful for making loops easily.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .022” (.56mm) |
OMEGA LOOP FORMING PLIER
The Omega Loop Forming Plier is specially designed with concave with serrated and helical tip for making precise loops. The omega loop of graduated cone 0.045” (1.14mm), 0.060 (1.52mm), 0.075” (1.91mm) diameters. The concave with parallel serration ensure the non- slippage grip and makes loops easily.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .025” (.64mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.022” × .025” (.56mm × .64mm) |
THREE JAW PLIER
Three Jaw Pliers is specially designed to allow make an effective bend on wires, perform more accurate contouring and effortless adjust clasps. The three jaws enhanced the durability and strong grip on all arch wires including both stainless steel and NiTi wires.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .020” (.51mm) |
TWEED LOOP FORMING PLIER
The Tweed Loop Forming Plier is designed for creating precise helical closing loops on orthodontic wires. The plier with 0.055” (1.4mm), 0.075” (1.9mm), 0.090” (2.3mm) diameter. The 3 step concave tip with the parallel serration ensures a non-slippage grip and makes loops easily.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .025” (.64mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.022” × .025” (.56mm × .64mm) |
YOUNG LOOP FORMING PLIER
The young Loop Forming Plier has three loop forming steps with diameters measures 1.3mm, 3mm and 4.2mm. it is used for making similar and identical loops in rectangular wires where the dental wire needs loops. Up to 0.040” (1.0mm)
| WIRE TYPE | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .040” (1.0mm) |
ADAMS PLIER WITH GROOVE
The Adams plier with Groove is specially designed for bending, adjusting orthodontic wires specially Adams clasps and other orthodontic appliances. The two flat pyramid square beaks allowing to make accurate and precise 90o angle. The groove at the tip is ensure firm grip of holding orthodontic wires.
| WIRE TYPES | MINIMUM | MAXIMUM |
|---|---|---|
| ROUND | .012” (.30mm) | .028” (.71mm) |
| RECTANGULAR | .016” × .016” (.41mm × .41mm) |
.022” × .028” (.56mm × .71mm) |